Now when you slice, you will see that it will only print the top 100mm of the part now. This will drop 200mm of that model below the build platform. That way you wont be able to move it past the limits because the. To date, I've looked at the offsets on a particular model, and then either guessed at a new offset (it was -36, well how about 40, where does that move it to), or used the up/down arrows on a field to (slowly) slide the model in some direction. That way the printers firmware wont allow it to go past 180mm x 180mm. My goal is to be able to position models at particular spots on the bed. If it was me, I would set the build volume in S3D (edit process settings > G-Code tab) and then I would also edit the firmware to turn on the virtual max endstops. This way the printer will print just the first 200mm of the part.Īfter that print is done, double click on the 300mm tall model and decrease your Z-axis offset by 200mm (so if it was 0mm previously, make it -200mm now). Re: How to set up the printer X/Y min/max. Import the entire 300mm model, click "edit process settings", Advanced tab, and enable the "Stop printing at height" option with a max height of 200mm. For example, if you had a statue that was 300mm tall, but your build volume was only 200mm tall, you could print it like this: You can also do things in S3D like dropping part of the model below the build table (z=0 plane) so that it won't be printed. Usually, people break up the models in their CAD package, since many times you want a very particular break line to avoid critical features.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |